RTTY
[Top] [All Lists]

Re: [RTTY] Clipped calls

To: "John GW4SKA" <ska@bartg.org.uk>, "Richard Ferch" <ve3iay@storm.ca>, <rtty@contesting.com>
Subject: Re: [RTTY] Clipped calls
From: <peter.jackson17@ntlworld.com>
Date: Mon, 11 Nov 2013 19:01:13 -0100
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
I think you may have the answer John, I have the afc on and do sometimes see the tuning indicator adjust it self. I will try it in the next contest, thanks again.
Pete G3KNU

-----Original Message----- From: John GW4SKA
Sent: Monday, November 11, 2013 6:26 PM
To: peter.jackson17@ntlworld.com ; Richard Ferch ; rtty@contesting.com
Subject: Re: [RTTY] Clipped calls

On the other hand, if there is a short break between your end returning to
receive and the other station starting TX, make sure you are not using AFC.
It can drift off and take a character or two to get right.
John GW4SKA

----- Original Message ----- From: <peter.jackson17@ntlworld.com>
To: "Richard Ferch" <ve3iay@storm.ca>; <rtty@contesting.com>
Sent: Monday, November 11, 2013 6:15 PM
Subject: Re: [RTTY] Clipped calls


Its on incoming calls  ie: KNU (sometimes &KNU) 599 001 001 G3KNU.
My concern if they leave my call of the end I am not sure if they have my call sign correct.
73 Pete G3KNU or &KNU

-----Original Message----- From: Richard Ferch
Sent: Monday, November 11, 2013 3:37 PM
To: rtty@contesting.com
Cc: peter.jackson17@ntlworld.com
Subject: Re: [RTTY] Clipped calls

If you mean that you are not seeing what the other station sends, rather
than that the first character of your own messages is not being
transmitted, that makes it sound as if your system is not returning to
receive quickly enough at the end of your transmissions, and the start
of the other station's message is getting covered up by your
transmitter. Can you monitor your outgoing transmissions, and if so are
you hearing a long squelch tail or period of diddle after the end of
your transmitted texts?

73,
Rich VE3KI


G3KNU wrote:

Hi just about every time during an exchange in a contest the prefix of my call sign is clipped or corrupted, but if my call ( I wish everyone would) is put at the end of the exchange its ok. I also noticed during the wae contest if I requested a repeat of a qtc the first one was garbage the second was ok. I
think there must be  an error in my basic setup, hope someone can put me
straight. I am using MMTTY with N1MM.

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3629/6820 - Release Date: 11/08/13

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>