MMTTY TROUBLESHOOTING
Went to get on WAE RTTY and MMTTY stand alone and MMTTY in N1MM does not
work. Receives fine. Single tone only on transmit.
1. Was working perfectly when last used in CQWW RTTY
2. Rig- TS990
3. FSK from ACC2 to Rigblaster Plus
4.. Using Edgeport USB to Serial- checks out OK
5. FSK works using radio alone
6. Grounding FSK line from ACC2 changes tone
7. Rigblaster keys on transmit (single tone)
8. Device manager in Win 7 shows no problems
9. No diddle when keyed
10. N1MM and Rigblaster work fine for SSB
11. If an option for transmit other than the Soundblaster card is selected
diddle is hears but reports are no tones on transmit
--
Tnx es 73
Richard W7ZR
www.w7zr.com
*Be joyful in hope, patient in affliction, faithful in prayer*
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|