Are you using AFSK (PKT) or FSK (RTTY)?
1) Disable PTT via CAT and use only PTT via RTS
2) Disable any CAT commands to switch TX/RX in MMTTY.
3) make sure "Sound card PTT" is not selected in
microHAM Router
4) make sure MMTTY's "USB Port" is set to "C"
5) make sure "strict BPS" is not selected in microHAM
Router
6) *Follow the example configuration* for MMTTY and your microHAM
interface available in Router (Help | Download Documents) or
online at www.microHAM-USA.com/support.html.
73,
... Joe, W4TV
On 9/16/2013 2:18 PM, KC4HW/Jim wrote:
Using a FTdx5000, micro Keyer II and MMTTY
Seems to have an excessive tail after the message ends?
Jim/KC4HW
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|