Joe
I agree that the 2800 Hz BW now on the table is way too much, except for the
60 m band channels for which that specific 2800 Hz rule was written.
The current FCC rules for below 10m band (except 60m) already allow
modulations with as much as 1360 Hz bandwidth, but they restrict those
digital formats to very specific baud rates (up to 300 baud) and specific shifts
(up to 1 kHz), and specific code formats. So, today, the current rules already
permit digital signals as wide as (1.2*300 + 1000) = 1360 Hz. (It works out to
2400 Hz in the 10 m band today).
I think that getting rid of the baud rate restriction is a good idea, but
allowing
up to 2.8 kHz bandwidth is not so good (except for the channelized 60 m band
as is currently permitted).
In summary, getting rid of the baud rate restrictions is a good idea, but
in my opinion permitting BW to extend beyond what is currently permitted
(around 1360 Hz or so) is not a good idea.
We have at least two opportunities to supply inputs:
(1) let the ARRL know now how you feel and why, and
(2) comment to the FCC on any NPRM which might result from this.
73
Kai, KE4PT
On 7/24/2013 12:50 PM, Joe Subich, W4TV wrote:
"Compatible with CW" was for emphasis - I strongly urge all users of
RTTY, JT65/JT9, PSK31/63/125, etc. to write their Directors and demand
that any proposal to the FCC (1) specify a bandwidth less than 300 Hz
and (2) prohibit unattended operation *of all types* unless *both*
stations contain hardware/software to inhibit transmission if there is
*any other signal* in the passband of the transmission plus a guard
band equal to 25% of the bandwidth of the signal to be transmitted.
73,
... Joe, W4TV
On 7/24/2013 10:00 AM, Kai wrote:
Why would you want to ban 45.45 baud 170 Hz shift RTTY by suggesting a "100 Hz
or less" bandwidth rule??
The occupied bandwidth [ITU-R and FCC definitions] of RTTY is 250 Hz, greater
than that of JT65. Even CW at more than 30 wpm occupies more than 100 Hz.
73,
Kai, KE4PT
On 7/23/2013 10:50 PM, Joe Subich, W4TV wrote:
Symbol Rate Rule Modernization
On the motion of ARRL West Gulf Division Director Dr David
Woolweaver, K5RAV, on behalf of the Ad Hoc Symbol Rate Rule
Modernization Committee,
the Board directed ARRL General Counsel Chris Imlay, W3KD, to prepare a
Petition for Rule Making with the FCC seeking to modify §97.307(f) to
delete all references to symbol rate. The Petition would ask the FCC “to
apply to all amateur data emissions below 29.7 MHz the existing
bandwidth limit, per §97.303(h), of 2.8 kHz.”
The committee determined that the current symbol rate restrictions
in
§97.307(f) “no longer reflect the state of the art of digital
telecommunications technology,” and that the proposed rule change would
“encourage both flexibility and efficiency in the employment of digital
emissions by amateur stations.” The Ad Hoc Symbol Rate Rule
Modernization Committee was dissolved with the thanks of the Board.
Save us from a Board of Directors that would not know Digital Operation
if it bit them on the ass. All we need is a bunch of 2.8 KHz wide
chunks of "white noise" across the entire "non-voice" spectrum. If
they want to remove the symbol rate, the bandwidth better be compatible
with that of CW (100 Hz or less) in the majority of the shared non-voice
spectrum.
As usual, the ARRL BOD has proven how little they know about amateur
operation!
73,
... Joe, W4TV
On 7/23/2013 4:06 PM, Radio K0HB wrote:
http://www.arrl.org/news/arrl-board-names-award-winners-okays-lotw-initiatives
73, de Hans, K0HB
--
"Just a boy and his radio"
--
Proud Member of:
A1 Operators - http://www.arrl.org/a-1-op
Minnesota Wireless contesters - http://www.W0AA.org
Arizona Outlaws contesters - http://www.arizonaoutlaws.net
Twin City DX Assn - http://www.tcdxa.org
Lake Vermilion DX Assn - http://www.lvdxa.org
SOC - http://www.qsl.net/soc
--
Superstition trails --> http://oldslowhans.com/
Sea stories here ---> http://k0hb.wordpress.com/
Request QSL at ---> http://www.clublog.org/logsearch/K0HB
All valid QSL requests honored with old fashioned paper QSL!
LoTW participant
------------------------------------
Yahoo! Groups Links
------------------------------------
Yahoo! Groups Links
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/MMTTY/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/MMTTY/join
(Yahoo! ID required)
<*> To change settings via email:
MMTTY-digest@yahoogroups.com
MMTTY-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
MMTTY-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|