Hello,
I get a lot of questions how to suppress "PSK"-spots and "DE"-spots from
Digital-Skimmers via the Digital Cluster System for RTTY-contests.
To suppress "PSK"-spots and "DE"-spots from the DCS use the commands:
"set/PSK no" /stop PSK-spots
"set/DE no" /stop DE-spots (station detected they not CQing)
Other useful commands:
"sh/filter" /show your current filter setup
"set/all" /delete all filters
"help" /show all possible commands
The DCS address is: dl4rck.ham-radio-op.net Port: 8000
Some basics: The DCS (Digital Cluster System) is the common system for all
Digital-Skimmers around the world. Each Digital-Skimmer send their receiving
results to this system. This are mostly RTTY, PSK31, PSK63 calls in the air in
real time. Each digital spots from the world wide cluster systems entered by
hand from anybody will be spread out too.
This means, only Digital-Skimmer and manual entered digital spots are
distributed.
It can be reached with each standard DX-Cluster software program like PuTTY.
Nearly every contest software has a DX-cluster module implemented and can be
used too.
See you in the upcoming DL-DX RTTY Contest next weekend.
vy 73 de Walter, DL4RCK
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|