I would like to try 75 baud in the BARTG event but am unsure on how to set this
up. Currently using MMTTY with N1MM, set up for FSK done by a Kenwood TS-450.
What settings need to be able to do 75 baud?
The TS450 has FSK shift settings of 200 450 and 850hz. Do I set one of these
for 75 baud?
On MMTTY setup under Decode tab, BaudRate setting - Is this the only adjustment
for MMTTY?
73David
VE3VID
Located in rural Canada
Solar power. Wood heat.
Mosley tribander @ 10m
Lots of space for dipoles,
bears and wolves......73
http://www.ve3vid.webs.com/
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|