RTTY
[Top] [All Lists]

Re: [RTTY] Contesting w/ 2 Tone & MMTTY

To: rtty@contesting.com
Subject: Re: [RTTY] Contesting w/ 2 Tone & MMTTY
From: Jerry Pixton <jpixton@shentel.net>
Date: Mon, 08 Apr 2013 23:57:17 +0000
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
And those of us with the nice Flex radios are stuck in AFSK. Since there is an interface to control NET (used by N1MM), perhaps Writelog's Xmmt.ocx can exploit that. Although I have never used it, does the "This is the Run Station" on the Radio menu inform Writelog of what the operator intends to do?

Joe, tell me more about the "RXM_Switch command"

It seems that 60 Hz off frequency when I am running in AFSK puts me into the guy next to me. Not nice.

Jerry, W6IHG

On 4/8/2013 10:18 AM, Ed Muns wrote:
Joe W4TV wrote:
It doesn't matter at all if one is using FSK instead of AFSK.

Net only applies to AFSK and I don't want the transmit frequency moving +/-
60 Hz when AFSK is used and Net cannot be turned off.

Ed W0YK



-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of
Joe Subich, W4TV
Sent: Sunday, April 07, 2013 10:05 PM
To: rtty@contesting.com
Subject: Re: [RTTY] Contesting w/ 2 Tone & MMTTY


But, not everyone uses F1/F11 for CQ. I use F2, for example. I'd
prefer the logger not force a specific Fn key to be CQ.

I doubt that would be a serious problem ... even if a %x
command were developed to turn off Net and allow the user to
decide when it should be disabled.

Net ON is an issue for me because I don't want my Run
frequency moving
around +/- 60 Hz. OTOH, if one zero-beats the desired station, it
won't matter.

It doesn't matter at all if one is using FSK instead of AFSK.
  I'm still of the belief that FSK should be preferred in any
case as I've heard too many simply atrocious AFSK signals.

73,

     ... Joe, W4TV


On 4/7/2013 10:54 PM, Ed Muns wrote:
Joe W4TV wrote:
On the other hand, G3YYD has previously suggested that
software using
2Tone use the RXM_Switch command to turn off Net when calling CQ
(F1/F11 in Writelog).  That could easily be complemented
by turning
Net ON if the transmit frequency changes by more than 500
Hz or 1KHz.
That would result in Net OFF when running (call CQ, Net
goes off) and
Net ON when in S&P or jumping frequency to grab a multiplier.

Yes, if/when this function is implemented in WriteLog.  But, not
everyone uses F1/F11 for CQ.  I use F2, for example.  I'd
prefer the
logger not force a specific Fn key to be CQ.

In any case, Net ON/OFF is not a significant issue since
2Tone limits
the AFC range to not more than about 50 or 60 Hz (depending on
version) from the preset Mark (or Space).

Net ON is an issue for me because I don't want my Run
frequency moving
around +/- 60 Hz.  OTOH, if one zero-beats the desired station, it
won't matter.


Ed W0YK

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty


--
-----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner/
jpixton@shentel.net
-----------------------------------------------
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>