RTTY
[Top] [All Lists]

Re: [RTTY] Incomplete Sending Dooms My Contest Plans

To: Tom Osborne <w7why@frontier.com>, "RTTY@contesting.com" <RTTY@contesting.com>
Subject: Re: [RTTY] Incomplete Sending Dooms My Contest Plans
From: David Tanks <ad4tj@yahoo.com>
Reply-to: David Tanks <ad4tj@yahoo.com>
Date: Fri, 8 Feb 2013 18:51:56 -0800 (PST)
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Did that also. No change. I can make contacts, just not showing in DII window. 
Help!

73,  David AD4TJ



________________________________
 From: Tom Osborne <w7why@frontier.com>
To: David Tanks <ad4tj@yahoo.com> 
Sent: Friday, February 8, 2013 9:49 PM
Subject: Re: [RTTY] Incomplete Sending Dooms My Contest Plans
 
HI David

First thing to do is shut down N1MM logger and restart.  It that don't work, 
reboot the computer.  Sometimes weird things happen when you're not 
operating :-)  743
Tom W7WHY



Well, I had everything set up and working at 5 PM today; left everything on, 
and came back at 8:15 to play in the contest. The 1st station I try to call 
my set up sends " NX " and nothing else! Put the radio on a dummy load and 
try other Macros; they are all the same, only sends the first 2 or 3 
characters, then nothing. Radio stays in transmit for the length of the 
Macro, then goes to receive. Checked Macros, no problems seen there. Closed 
the program( running N1MM and MMTTY ), and restarted. Same thing, no change. 
Started a new log in N1MM, changed to the sample Macro for the WPX contest, 
same result. Listened on another radio, the Macro is being sent, it is just 
not showing all of it in the DII window. Made a contact at 9:25, so I know 
it is sending all of the info. What can I check/change? Very strange.

Thanks in advance.

73, David AD4TJ
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty 
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>