RTTY
[Top] [All Lists]

Re: [RTTY] AFSK Tips

To: "RTTY reflector" <rtty@contesting.com>
Subject: Re: [RTTY] AFSK Tips
From: "Dave Hachadorian" <k6ll@arrl.net>
Reply-to: Dave Hachadorian <k6ll@arrl.net>
Date: Sun, 27 Jan 2013 09:17:28 -0700
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Someone had a tip the other day (W4TV?) recommending setting the soundcard output level on the high side, thereby minimizing mic gain on the radio side, keeping unwanted hum and distortion at a minimum. That sounded like a good idea to me.
On the K3, apparently there is a special 400 Hz DSP filter that 
can be engaged in the AFSK transmit audio path.  That filter has 
also gotten good reviews from the guys who recently did the 
FSK/AFSK comparison study.  The MMTTY high order transmit filter 
also got good reviews.
I am also considering going to AFSK, just to get rid of the K3's 
whacky power transients on FSK.  I am tired of seeing amplifier 
screen current jump all over the place.  It makes me nervous.
Dave Hachadorian, K6LL
Yuma, Arizona



-----Original Message----- From: Dennis
Sent: Sunday, January 27, 2013 8:57 AM
To: rtty@contesting.com
Subject: [RTTY] AFSK Tips

Having read some of the issues about AFSK vs FSK, I'm thinking of
changing over
from FSK to AFSK operation. I'll be using a K3, if that matters. I
already know about
not overdriving the mike input, but other than that, are there any tips
for AFSK
operation in general, or K3 specific?

Dennis W1UE

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>