On Sun, Jan 20, 2013 at 10:03 PM, aflowers@frontiernet.net
<aflowers@frontiernet.net> wrote:
> operatator with a 100W and a dipole as it is for the contest CQ machine with
> 1000W and a stack.
Wait - there is another way to operate? I thought 100 W and wire
antennas was the only way?!?!?
> Right now you many of these people do not have to wait for manufacturers to
> change their FSK keying circuits (or in many cases what is more likely to be
> a firmware revision). AFSK with a waveshaped input may
No flashable firmware in the IC746Pro, so no real possibility of
changing anything at the radio end. Regardless, I have zero interest
in putting out a crappy signal (in any mode), so I am interested in
this thread. I use FSK exclusively on the 746 (serial port ->
RigBlaster+ -> 746).
I, for one, would sure like to see some tests done to see which
FSK-capable radios (regardless of how the radio actually generates the
FSK internally) put out less-than-desirable signals.
--
Peter Laws | N5UWY | plaws plaws net | Travel by Train!
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|