Great page. Thanks for sharing this with us Al.
I've added a link to this page from my FSK interface page.
73, Don AA5AU
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Al Kozakiewicz
Sent: Tuesday, October 16, 2012 10:00 AM
To: Dick Kriss; RTTY Reflector
Subject: Re: [RTTY] Icom FSK interface
http://www.k7sfn.com/projects/signalink.html
If you have an Icom radio and are starting with a Signallink as your sound card
interface, this simple and clever modification to
the device basically brings out the FSK keying pins from the accessory cable to
a jack on the Signallink. From there, it's a
standard FSK interface (i.e. transistor switch) to a standard serial port.
Al
AB2ZY
________________________________________
From: RTTY [rtty-bounces@contesting.com] On Behalf Of Dick Kriss [aa5vu@att.net]
Sent: Tuesday, October 16, 2012 6:02 AM
To: RTTY Reflector
Subject: [RTTY] Icom FSK interface
A ham friend called last night he wants to get on RTTY with a PC and an Icom
IC-756 Pro III and he plans to use FSK. He wanted to
know if there was an inexpensive interface device to handle the connections
between the PC and the Pro III.
As a Mac user I only use AFSK and could not help him. The SignaLink USB is good
for AFSK but does not support FSK. How do FSK users
handle the connections between the PC and and Icom?
I referred him to AA5AU's web page and he did not see any mention of using
something like the SignaLink for FSK.
Dick AA5VU
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|