Hi Jay....how is KISS related to host mode??? I can use hyperterminal and
logger32 digital window to decode rtty no probs but lately both N1MM and
Writelog are both giving me grief trying to use their clone receive only
Windows...N1MM tells me that comport1 is already used so I cant associate it
With the clone window and Writelog says I cant initialize the unit in host
mode??? So if I use the four commands that you mentioned, this should
hopefully cure my problem??? Thank-you for the help...it is appreciated...
73
Ted VE3SS
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Jay WS7I
Sent: October 12, 2012 8:17 PM
To: rtty@contesting.com
Subject: [RTTY] PK232
If you can use hyperterm then the pk-232 is not in kiss mode.
>From a google on the subject pk-232 in kiss:
You need several commands to get KISS to turn on. Here is the exact command
sequence that will get an AEA PK-232 or PK-87 into KISS mode:
KISS on -- enable KISS version of host mode
RAWHDLC on -- turn off AX25L2 (the protocol is now handled by the PC)
PPERSIST on -- turn off DWAIT and enable p-persistence
HOST on -- start KISS running
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2677 / Virus Database: 2601/5827 - Release Date: 10/12/12
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|