I assume you use FSK not AFSK? In MMTTY have you got the right com port
selected under the TX tab ptt&fsk? Under the misc tab, do you have
Com-Txd(FSK) selected?
John N1JM
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of allan1@dejazzd.com
Sent: Tuesday, July 10, 2012 6:48 AM
To: rtty@contesting.com
Subject: [RTTY] MMTTY Problem
I recently had to replace my lap top so I downloaded MMTTY, but now have a
problem with rtty.
I use an Icom 756 PRO3 with MMTTY.
I am in the rtty mode on the PRO3 and when I click on a macro in MMTTY or
the TX button the transmitter goes into transmit mode and I hear the
carrier, but no rtty. When I type after clicking on TX the letters show on
the screen (as well when I click on a macro), but still just get the
carrier.
I use ACC1 on the PRO3 which then plugs into a BUX COMM adapter which goes
to COM3 (USB port) and also the headphone and mike jacks on the new
computer.
Can anyone help?
Thanks,
Allan W2TN
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|