I have an RFI problem on 17 meters. I cannot operate more than 100 watts or my
FSK stops shifting. So it's definitely RFI getting
into something. I have tried a few things and the computer chassis is grounded
to my large copper plate where all my grounds go. The
ground wire is less than 18" to the copper plate.
The weird part about it is that when the carrier stops shifting, the message in
WriteLog stops. If I lower the power, the rest of
the message goes out so I don't actually lose anything being transmitted. I
have changed my FSK interface, tried each of my five COM
ports and a few other things I can think of.
It's almost like the RFI is getting right into the PC and stopping the message
from going out. I don't have this problem on my
laptop. Just haven't figured it out yet. Doesn't seem to be a grounding problem
though.
Don AA5AU
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Bill Turner
Sent: Wednesday, April 04, 2012 4:26 PM
To: rtty@contesting.com
Subject: Re: [RTTY] WHICH BEGS THE QUESTION
ORIGINAL MESSAGE:
On 4/4/2012 2:19 PM, Bill wrote:
> I've connected computer case to radio for years.
> I can't honestly say I ever noticed more or less rfi.
REPLY:
Every situation is different.
Here, without the ground wire between computer and radio, 160 meters is useless
above 400 watts. The keyboard locks up.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|