RTTY
[Top] [All Lists]

Re: [RTTY] Finding & Removing Hidden COM ports in XP

To: <rtty@contesting.com>
Subject: Re: [RTTY] Finding & Removing Hidden COM ports in XP
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
Date: Thu, 19 Jan 2012 19:54:26 -0600
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Bob, thanks for the info on DriveCleanup.  I haven't had time to install it 
yet, but several people have suggested I take a look at
USBD which is a Free utility to view any USB devices that are currently 
connected and also gives you a history of USB devices that
were previously connected.  I'm going to try it this evening.  Since I haven't 
used it yet, I can't say that it is similar to
DriveCleanup as far as cleaning up old USB device history.

http://www.nirsoft.net/utils/usb_devices_view.html

73, Don AA5AU

-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On 
Behalf Of Robert Chudek - K0RC
Sent: Thursday, January 19, 2012 7:23 PM
To: rtty@contesting.com; Don Hill AA5AU
Subject: Re: [RTTY] Finding & Removing Hidden COM ports in XP

Hello Don...

Thanks for adding the new page. It should be helpful when dealing with 
COM and USB issues.

I have a Dell GX620 desktop that has 8 USB ports. I have plugged dozens 
of USB devices into this computer over the years. Recently I was 
starting to have some issues with a non-ham device (USB flatbed 
scanner). It was giving me fits. In addition, I was getting erratic 
messages regarding some other USB devices too (the keyboard was one!).

When researching my problem I found a solution that worked for me. This 
was a utility that will "flush" all the old USB drivers from your system 
and then with a reboot, only the current USB devices are added back into 
the OS. This approach was supposed to remove all the old USB drivers 
that accumulate over time. I was skeptical but gave it a try. Voila! All 
the "weirdness" went away and all my current USB devices worked properly.

You must download and install (DriveCleanup.exe) into 
C:\Windows\System32. You then execute the program from the CMD prompt. 
Here's the link to the site describing this approach. 
http://www.techspot.com/vb/topic145884.html

This is certainly a "shot-gun" approach. I have done it on several of my 
computers and it has worked without issue.

73 de Bob - KØRC in MN

------------------------------------------------------------------------

On 1/19/2012 10:34 AM, Don AA5AU wrote:
> I've created a webpage with information on how to find and remove hidden COM 
> ports (USB serial or legacy) on Windows XP computers.
These ports are not shown in the normal Device Manager window even when View>  
Show Hidden Devices is enabled.  With this procedure,
you are able to view all hidden devices in Device Manager that normally would 
not show up.
>
> Thanks to Rick, N6XI, for doing a lot of leg work on this along with others.  
> The link to this page is from the Lagniappe Page on
rttycontesting.com.  Or viewed directly here:
>
> http://rttycontesting.com/lagniappe/removehiddencomports.html
>
>
> 73, Don AA5AU
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>