Rick, N2AMG, fixed N1MM RTTY now so that the CTRL Fx keys work in the RTTY
macros. You can download the newest update from www.n1mm.com.
I found a CW macro file that N2IC posted on the N1MM reflector some time
back and changed it a bit for RTTY. You can send your call or a CQ on the
2nd radio by hitting an F-key.
It can be tweaked for your individual operating style, but it works pretty
good. 73
Tom W7WHY
F1 CQ,{tx}{enter}test * * cq {rx}
F2 EXCH,{tx}{enter}! {exch} {exch} ! {rx}
F3 QSL,{tx}{enter} tu * cq {rx}
F4 W7WHY,{tx}{enter}* * {rx}
F5 HIS CALL,{tx}{enter}
F6 Log then,{TX}{ENTER}{CALL}{LOGTHENgrab} TU NOW {F5}{F2}{RX}
F7 Othr Short,{ctrlf10}
F8 Othr Lng,{ctrlF11}
F9 Lng Exch,{tx}{enter}{exch} {exch} {exch}
F10 CQ,{tx}{enter}test * * cq {rx}
F11 Lng CQ,{tx}{enter}test * * {enter}test de * * cq {rx}
F12 StopTX F4,{stoptx} {ctrlf4}
F1 S&&P CQ,{tx}{enter}cq * * cq {Rx}{run}
F2 S&&P Exch,{tx}{enter}tu {exch} {exch} {rx}
F3 S&&P TU,{tx}{enter}tu {rx}
F4 S&&P Call,{tx}{enter}* * {rx}
F5 S&&P his call,!
F6 AGN?,{tx}{enter}AGN? {rx}
F7 S&&P Othr Shrt,{ctrlf10}
F8 S&&P Othr Lng,{ctrlF11}
F9 Lng Exch,{tx}{enter}{exch} {exch} {exch} {rx}
F10 CQ,{tx}{enter}cq * * cq {rx}
F11 Lng CQ,{tx}{enter}cq * * cq * * cq {rx}
F12 CtrlF4,{ctrlF4}
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|