Re: [RTTY] 300 baud RTTY

["Alex" <alex@kr1st.com>]

Bob wrote:

> Yes, you are correct that EXTFSK is hard coded to 45.45 baud. It would be
great if that restriction could
> be removed but it doesn't appear that will happen.

The problem is caused by the resolution of the multi-media timer that is
used. The resolution of this timer is 1ms, which will give you accurate
timing up to about 100bd. 

73,
--Alex KR1ST.com
http://www.airlinkexpress.org


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty