BTW if a profile has a setting you don't like or need, like AFC on and you
want it off, just make the change in MMTTY and then re-Assign it in the Menu
Profile Assign Menu. Keep in mind that any changes you make will be
assigned to the profile, so it's best to launch the profile (fresh so you
don't incorporate changes you don't want made), then only make the change to
MMTTY that you want made in the profile and then Assign. Actually it is
simpler than my explanation.
73 Art W2NRA
"Keep to the Code!"
w2nra.com
----- Original Message -----
From: "Art Searle W2NRA" <w2nra@optonline.net>
> Hi Jim,
>
> You can either replace your USERPARA.INI file with the new one. Or you
> can select profiles out of the new file into a text editor and save them
> with a .pro name. Then open MMTTY and make sure you have empty profiles
> under the profile menu. If not, delete those you don't need. Then load
> from file one of the .pro files. Then under the profile menu use Assign
> Menu to add the profile you just opened. Repeat the process for
> additional profiles you want to add.
>
> 73 Art W2NRA
> "Keep to the Code!"
> w2nra.com
> ----- Original Message -----
> From: "Jim Sharp" <jimsharp1@verizon.net>
> To: "RTTY Contesting" <rtty@contesting.com>
> Sent: Friday, January 30, 2009 01:02 PM
> Subject: [RTTY] MMTTY Profiles
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|