> Is there something in the MMVARI settings that I have to
> change to use the AF output????
No, I used a simple 1/8" stereo audio cable between the AF Out
and Line In of the soundcard for years. I still use the AF Out
with the stereo line input of an old SoundBlaster Digital Music
(MP3+) box when I'm trying to duplicate some non-microHAM
configurations. Do make sure your using a stereo cable and not
an "attenuating cable" made for feeding a speaker output to the
mic input of an audio recorder.
> When I plug in the stereo plug from the Rigblaster to the front
> Phones jack, I get the signals and can print.
Which Rigblaster? As far as I know the Rig blasters (other than
the Rig Blaster Pro) only work with TRANSMIT audio ... receive
audio goes directly from the receiver to the soundcard and that's
all I can say about someone else's product.
73,
... Joe, W4TV
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of Tom Martin
> Sent: Friday, January 02, 2009 4:47 PM
> To: rtty@contesting.com
> Subject: [RTTY] FT-1000MP Speaker
>
>
> Thanks to all that have replied. I'm approaching senility
> but I'm not quite there yet! I haven't pushed the orange
> Monitor button; so, no need to turn it off.
>
> I also tried to get receive audio from the AF Output on the
> rear of the rig. This allows me to turn down the AF but I
> don't get any RTTY signals using the AF output. When I plug
> in the stereo plug from the Rigblaster to the front Phones
> jack, I get the signals and can print.
>
> Is there something in the MMVARI settings that I have to
> change to use the AF output????
>
> Murphy has struck in many ways today. Typical day before the contest.
>
> 73,
>
> Tom W8JWN
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|