Please use the DX command to say who you worked or saw on 160m RTTY. I
don't monitor the Announce commands. The DX command format is
DX frequency callsign comments
the comments are optional but should say RTTY.
For example dx 1808 np3d/w2 rtty
I don't know the Spider format.
My "Packet" / Amateur Radio Cluster (ARC) filters are set up to show the
DX spots but block Announcements.
I don't want to start a discussion between the various cluster formats
nor ways to post but if you want contacts to be seen, use the DX
command. It may be a different format or command on the "Spider
DXclusters", I use an "AK1A Cluster".
BTW On 160m RTTY, I worked WB2OQQ and K4ADR last night, in the past week
I have worked NP3D/W2, N4MIO, WB5AAA and was spotted by W2QO. Also I
heard a W7 in MI last night. He didn't hear me answer his CQ.
73, Ed
K3IXD
Date: Wed, 07 May 2008 16:49:57 +0200
From: Danilo Brelih <danilo.brelih@siol.net>
Subject: Re: [RTTY] CQ RTTY 160 WAS
To: rtty <rtty@contesting.com>
Message-ID: <4821C195.3090606@siol.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
James Douglass pravi:
> > You are correct on 160 meters at this time of year.
I know "THE BAND" well. Few years ago I finished WAS on CW from here!
As sysop of S50CLX Spider DXCluster my suggestion would be using CHAT
command with help bellow for Spider clusters.
CUL Dan, S50U @ http://s50clx.infrax.si
***********************
chat <group> <text> Chat or Conference to a group
It is now possible to JOIN a group and have network wide conferencing
to that group. This system uses the existing ANN system and is
compatible with both other DXSpider nodes and AK1A clusters (they use
ANN/<group>). You can be a member of as many "groups" as you want. To
join a group type:
JOIN RTTY160M (where RTTY160M is the group name)
To leave a group type:
LEAVE RTTY160M
You can see which groups you are in by typing:
STAT/USER
and you can see whether your mate is in the group, if he connects to the
same node as you, by typing:
STAT/USER ac0e
To send a message to a group type:
CHAT RTTY160M anyone around ?
or
CH RTTY160M I am CQing on 1808 now ?
join <group> Join a chat or conference group
JOIN allows you to join a network wide conference group. To join a
group (called RTTY160M in this case) type:
JOIN RTTY160M
leave <group> Leave a chat or conference group
LEAVE allows you to leave a network wide conference group. To leave a
group (called RTTY160M in this case) type:
LEAVE RTTY160M
show/chat [<group>] [<lines>] Show any chat or conferencing
This command allows you to see any chat or conferencing that has
occurred whilst you were away. SHOW/CHAT on its own will show data
for all groups. If you use a group name then it will show only chat
for that group.
-- http://s50u.s50e.si
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|