RTTY
[Top] [All Lists]

Re: [RTTY] VP6DX

To: <rtty@contesting.com>
Subject: Re: [RTTY] VP6DX
From: "Charles Morrison" <cfmorris@bellsouth.net>
Reply-to: cfmorris@bellsouth.net
Date: Wed, 27 Feb 2008 11:25:22 -0600
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
> Date: Tue, 26 Feb 2008 10:33:45 -0800
> From: Kok Chen <chen@mac.com>
> Subject: Re: [RTTY] VP6DX
> To: RTTY Reflector <rtty@contesting.com>
> Message-ID: <76797DD9-235D-430C-9F7D-074812F03969@mac.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
> 
> Another interesting thing is that the news page also mentioned that
> VP6DX is using the microKeyer II interface.  The reason it is of
> interest to us is this: if they are using FSK instead of AFSK, the
> actual baud rate from a microKeyer will not be 45.45 baud but it will
> instead be either 45.0 baud or 45.76 baud (depends on which one the
> software decides is "closer").
> 
> 
> 73
> Chen, W7AY
> 
> 

This is very interesting, why is this?  I thought the speed was set by the
software?

Charlie
Ki5xp


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>