I saw a couple of spots that indicated 15M Q's into southern CA. They
were loud enough here on 20M, but I didn't make it in.
73, doug
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
Date: Fri, 11 May 2007 19:45:58 -0500
Thread-Index: AceUKvyNjz7jsLpcQ+mBjthM9pxhVAAAcqQg
I received a copy of an E-mail from W0GJ saying he worked them on 20 meter
RTTY (worked on a 5 element monobander at 155' but
inaudible at 5 ele monobanders at 45' and 100') on 4 May at 2323Z but he is
not showing in the log on RTTY. I was at the rig when
the initial spot came in that Friday evening but had no copy. They were
only on for an hour. I checked all members of the RTTY
DXCC Honor Roll as of 14 April 2007 and only JA2VPO, JE1GMM and JH4IFF show
up with RTTY contacts and all of those are shown on 15
meters. I wonder if 20 meter RTTY contacts are not showing in the on-line
log?
I have to believe that Glenn (W0GJ) worked them if he said he did.
RTTY contacts consisted of only 0.7% of the total log from BS7H.
73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Jim Reisert AD1C
Sent: Friday, May 11, 2007 7:18 PM
To: RTTY
Subject: Re: [RTTY] BS7H QSO?
No one from North America worked BS7H on RTTY.
BS7H worked only BY, HL, JA, KH6, RX4HZ (already reported), UA9, UN, VR and
YB.
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA
+978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.us
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|