Stu,
No, this sound more like RFI getting into the PTT line (or one of the other
Rascal connections) and hanging your computer.
Try transmitting into a dummy load or turn your RF power all the way down. Does
it still hang?
73 de Bob - KØRC in MN
------------------------------
Message: 11
Date: Tue, 27 Feb 2007 19:22:16 -0500
From: "Stuart Spatz" <slspatz@cox.net>
Subject: [RTTY] Need some assistance
To: <rtty@contesting.com>
Message-ID:
<20070228002216.NHOU2213.eastrmmtao105.cox.net@eastrmimpo02.cox.net>
Content-Type: text/plain; charset="us-ascii"
I got an ICOM 756 PRO and I am attaching a Rascal to it running MMTTY with
EXTFSK plug in.. I can receive fine, but having problems on the transmit
side.
I know that I have the correct port since I can see power out of my radio.
But when I transmit, I can't stop transmitting and my computer mouse freezes
up. When I physically break the transmit line, I can still receive but my
mouse is still frozen. I need to reboot to get control of my computer again.
I believe that the problem is the transmit screen setting. I would like to
know the correct settings for the transmit screen and for the radio command
section.
Thanks in advance.
Stu
K4MIL
slspatz@cox.net
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|