I'd be happy to help you Luciano if I can, but may need some help from others.
I found a manual at http://www.mixw.net/RigExpert/re_manual.pdf and from what I
can tell, it's possible the S/D will not do FSK with
MMTTY. But I'm not 100% sure about this.
According to the manual, the S/D will work with MMTTY by using the REAUDIO
driver under Win2000 and WinXP but supports only the
following functions:
AF IN/OUT
CAT
PTT
It does not mention FSK.
Perhaps someone else on the reflector can help?
73, Don AA5AU
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Luciano Fusari
Sent: Monday, February 26, 2007 12:10 PM
To: rtty@contesting.com
Subject: [RTTY] RigExpert S/D with MMTTY
I have an IC-756PROIII hooked up with a RigExpert S/D via USB port and MixW
2.18 sw and all works fine.
Wanted to test the above configuration with MMTTY always on FSK but up to now
cannot get running PTT and FSK signal.
There is some one that could give some suggestions on MMTTY setup ?
73's de Luciano I5FLN
Home e-mail
luciano.fusari@alice.it
Home Page
http://www.webalice.it/luciano.fusari/
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|