Hi Beau.
Before you make other changes, be sure to try the "inverted" mode. I just
had the same problem with a TS-570DG using MMTTY...the transmit was
"inverted". Hopefully, this should do the trick. Print you this weekend.
73,
John W9ILY
>Date: Thu, 04 Jan 2007 21:58:44 -0600
From: beau <n9mfk@insightbb.com>
Subject: [RTTY] fsk?
To: rtty@contesting.com
Message-ID: <459DCCF4.8040709@insightbb.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi all I am new to to group
I am trying to use a ts570gs in fsk mode using a rig baster pro an mixw
it sounds ok but no one can decode my transmit
i have read a few post my question is for the fsk keying to work correct
do i need to set the parity on my fsk com port to 5 n an 1an are there
any other settings i need to set on that com port thanks beau
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|