THANKS JOE,
NOW I CAN QUIT RACKING MY BRAIN OVER THIS. I WILL GO BACK TO
MULTIPLE PCI COMM PORTS WHEN USING WRTIELOG. THE ADVERTISEMENT
BRIEFLY MENTIONED FSK AND I WAS TOO HASTY. SOME DAYS PEANUTS,
SOME DAYS SHELLS.
73 DE JACK / W7LD
----- Original Message -----
From: "Joe Subich, W4TV" <w4tv@subich.com>
To: "'Jack West'" <w7ld@theriver.com>; <rtty@contesting.com>
Sent: Saturday, December 09, 2006 10:05 AM
Subject: RE: [RTTY] WRITELOG USB INTERFACE PROBLEM
>
> > WRITELOG VER10.52 (FSK RTTY) TO THE TS-940 VIA THE USB II INTERFACE
> > USING WIN-XP-PRO. THE CAT WORKS, THE PTT WORKS, THE CW WORKS, ETC.
> > BUT "I AM UNABLE TO STEER FSK COMMANDS FROM THE MMTTY ENGINE TO THE
> > USB INPUTS OF THE MICRO HAM USB II UNIT."
>
> WriteLog does not permit use of EXTFSK in the MMTTY plug-in. You will
> note there is no way to select EXTFSK as the "PTT Port" in the MMTTY
> plug in and no option to select EXTFSK in RTTYrite as the FSK port
> (which is passed to MMTTY at startup). Due to that limitation, the USB
> II cannot be used for FSK with MMTTY and WriteLog. Similarly, since
> "Software FSK" in RTTYrite is limited to TxD only, FSK cannot be used
> with RTTYrite and the USB II.
>
> You have discovered a limitation of the application software as USB II
> functions quite well with MMTTY/EXTFSK on a stand-alone basis. USB II
> "overloads" the DTR line from the USB UART and uses the same output for
> CW and FSK (with EXTFSK).
>
> 73,
>
> ... Joe Subich, W4TV
> microHAM America
> http://www.microHAM-USA.com
> http://groups.yahoo.com/group/microHAM
> support@microham.com
>
>
>
> > -----Original Message-----
> > From: rtty-bounces@contesting.com
> > [mailto:rtty-bounces@contesting.com] On Behalf Of Jack West
> > Sent: Friday, December 08, 2006 11:40 PM
> > To: RTTY GROUP
> > Subject: [RTTY] WRITELOG USB INTERFACE PROBLEM
> >
> >
> > GENTLEMEN:
> >
> > I HAVE BEEN USING WRITELOG SUCCESSFULLY IN RTTY (FSK) AND CW
> > SINCE VER. 10.46 UNDER WIN-98SE USING MULTIPLE PCI COMM PORTS.
> > NOW I AM TRYING TO USE WIN-XP AND USB VIA A MICROHAM USB II
> > INTERFACE. I NEED HELP.
> >
> > WHAT WORKS:
> >
> > RUNNING MMTTY RTTY PROGRAM IN FSK USING USB II INERFACE AND THE
> > EXTFSK ADD ON PROGRAM RUNNING WIN-XP PRO TO MY TS-940. ALL
> > FUNCITONS WORK AS ADVERTIZED, IE. CAT, FSK, PTT, ETC.
> >
> > RUNNING N1MM PROGRAM (FSK RTTY) (CW) (MMVARI SOUND CARD PROGRAMS)
> > INCLUDING AFSK RTTY, USING MICRO HAM USB II USB INERFACE AND
> > WIN XP-PRO TO MY TS-940. THE FSK RTTY USES THE MMTTY ENGINE AND
> > THE EXTFSK ADD ON.
> >
> > RUNNING MIXW PROGRAM (ALL AFSK, CW, AND SOUND CARD MODES) USING
> > WIN-XP-PRO TO MY ICOM-735 VIA THE USB II INTERFACE. (NON FSK
> > CAPABLE)
> >
> > RUNNING WRITELOG VER.10.52 CW AND SSB MODES (DVK) USING
> > WIN-XP-PRO TO MY TS-940 VIA THE USB II INTERFACE.
> >
> > RUNNING WRITELOG VER.10.52 (FSK RTTY) WITH MMTTY V13 WRITELOG
> > PLUGIN TO MY TS-940 USING WIN-98SE, INCLUDING PACKET SPOTTING
> > USING MULTIPLE COMM PORTS. ALL FUNCTIONS 100%.
> >
> > RUNNING MIXW (FSK RTTY) USING MMTTY ENGINE AND EXTFSK ADD ON
> > VIA WIN-98SE TO MY TS-940. ALL FUNCTIONS 100%.
> >
> > WITH A COMM PORT INTERFACE, USING EITHER WIN98SE OR WIN-XP-PRO, I
> > SIMPLY SELECT A PORT THAT I HAVE INCLUDED IN COMMSLOT .INI AND A
> > PORT FROM THE RITTY WINDOW AND ALL IS WELL WITH FSK SIGNALS.
> >
> > WHAT DOES NOT WORK:
> >
> > WRITELOG VER10.52 (FSK RTTY) TO THE TS-940 VIA THE USB II INTERFACE
> > USING WIN-XP-PRO. THE CAT WORKS, THE PTT WORKS, THE CW WORKS, ETC.
> > BUT "I AM UNABLE TO STEER FSK COMMANDS FROM THE MMTTY ENGINE TO THE
> > USB INPUTS OF THE MICRO HAM USB II UNIT."
> >
> > EXTFSK PROGRAM IS NOT USED WITH WRITELOG. AA7AU'S WRITELOG
> > WRITE UP MENTIONS THE USE OF USB AND TALKS ABOUT IT BEING SELECTED
> > IN THE PORTS MENU. (WHERE?) I HAVE BEEN WORKING ON THIS PROBLEM
> > FOR SIX MONTHS AND I NEED HELP. WHAT AM I MISSING?
> >
> > WHAT ARE THOSE MONO AND STEREO SOUNDCARD FSK TU'S IN WRITELOG??
> > HOW, WHY, AND WHEN DO WE USE THEM?
> >
> > I HAVE READ AND READ AND I HAVE NOT FOUND THE ANSWER.
> > AN ANSWER FROM SOME KIND SOUL WILL BE MUCH APPRECIATED.
> >
> > DE
> > JACK / W7LD / "LUCKY DOG"
> >
> > PS. I HAVE HAD NO PROBLEMS WITH THE MICRO HAM USB ROUTER PROGRAM
> > AND ITS VIRTUAL COMM PORTS. THEY WORK AS ADVERTISED.
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> >
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|