On Jul 27, 2006, at 11:39 AM, Brad Wilcox wrote:
> I noticed this past weekend that I had only confirmed 1 state in
> the WAS on
> LOTW. After manually tweaking for QSL's, I had 50 Basic, and 48
> RTTY states
> confirmed. Apparently QSL's will not automatically select which
> QSL lines
> up with which state.
??? This makes no sense. When I go to look at my account listings,
all the totals are shown.
> You have to manually select QSL's per band, mode, and
> state. It can be a lot of work!! For now don't expect them to
> automatically show as WORKED without a little manual intervention.
Nonsense. Go to LotW, select the Awards tab, select your WAS account
and you will get a list of your total QSLs for each type: Basic, CW,
Phone, RTTY, 160m, 80m, etc.etc. If you select an award, like "Basic"
on the selection tab, select the "All Credits" button above, click on
"Select WAS award to view", you will get a list of all the states
confirmed, with the particular callsign of the station worked for
that particular confirmation. (If you select "All entities" instead
of "All Credits" you will get a list of all 50 states, showing the
QSLs and showing blank callsign fields for the ones you still need.)
If you click on the worked callsign (it's a link), you get all the
details of the particular QSO that would be on the QSL card.
Absolutely no manual labor required. It's all done for you.
Hope this helps.
73,
John E Bastin, K8AJS
jbastin@sssnet.com
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|