That is the correct behavior. A single port can be connected
to only one device at a time. Thus, if COM4 is FSK for the
first microKEYER, COM4 cannot be used for any other purpose
on either microKEYER.
For support on microHAM equipment or software e-mail to
"support@microham.com" or join the microHAM group at:
http://groups.yahoo.com/group/microham
73,
... Joe Subich, W4TV
microHAM America
www.microHAM-USA.com
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of Miquel Ángel
> Sent: Tuesday, March 14, 2006 2:15 PM
> To: Rtty@contesting.com
> Subject: [RTTY] TWO MICROHAM HELP
>
>
> Anyone works with the DEVICE ROUTER 3.1 at the same time with
> two MICROHAM and two equipment with same port for FSK with MMTTY .
>
>
>
> It does not work to me .One of port of the equipment becomes
> disconnected to me when conect the order . Some idea .
>
>
>
> Thanks
>
>
>
> EA3NB Miquel Ángel
>
> miquelarnal@gmail.com
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|