ORIGINAL MESSAGE:
At 07:57 PM 1/22/2006, John Desmond wrote:
>When using the main knob as the RX knob for RX tuning, don't forget to
>lock the TX VFO. I know I bump mine often enough when doing that.
>
>
>73, John K0TG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Good point. As I recall, my IC-746PRO would not allow locking the TX
VFO so I had to be careful to NOT tune during TX. The FT-1000MP I now
have has a separate knob about 4 inches away and I haven't bumped
that one yet. :-)
Bill, W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|