Hi Guys,
Though a ham for 44 years I've never been on RTTY. I tried getting setup
tonight but ran into a roadblock. Wondering if anyone can point me in the
right
direction.
Here is where I'm at:
1) Rig is a Yaesu FT-1000-MkV.
2) Interface is a BUX COMM Rascal GLX Mark V going to COM 1. (Com 1 is
known to work when previously used with Rig Control).
3) The 5 pin cable from the Rascal is going to the RTTY 5-pin jack on the
1000-MP.
4) Software is WriteLog 10.
5) WriteLog RTTY Setup is setup for Com 1.
6) I tested my Sound Card by connecting a microphone to the mic. input and it
records and playsback fine.
Now for the "roadblock":
1) When I turn of WriteLog the 1000-MP immediately locks up in Transmit and I
get the Error Message "Comm Port Not Available".
Any idears what the problem is?
Thanks & 73,
Dick- K9OM
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|