The RigBlaster Pro isolates the receive cables, but I don't believe the
Plus does.
Jim N7US
> -------- Original Message --------
> Subject: [RTTY] Re: Help with keeping RF out of PC
> From: knormoyle@comcast.net
> Date: Tue, January 11, 2005 1:18 pm
> To: rtty@contesting.com
>
> >> On Tue, 11 Jan 2005, Marco Spalluzzi wrote:
>
> > > Hi Peter, if it's an rf related problem going into the pc, you can put
> > > some
> > > little isolation transformers on the soundcard in and out wires, to
> > > isolate
> > > it from radio.
>
> > Peter Laws wrote:
> > RigBlaster+ takes care of that.
>
>
> Actually, the Rigblaster+ only isolates the pc to rig xmit audio
> with a transformer? There is no isolation of rig rcv audio to pc. They
> say to just use a straight cable.
>
> Schematic is at http://www.westmountainradio.com/pdf/Schematplus.pdf
>
>
> A lot of people seem to also isolate the rig rcv audio to pc. Otherwise
> there's a gnd to gnd connection at least?
>
> -Kevin
> KE6RAD
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|