RTTY
[Top] [All Lists]

RE: [RTTY] FT-1000MP Mark V Field & PSK31/MFSK31/RTTY Via Soundcard

To: <rtty@contesting.com>
Subject: RE: [RTTY] FT-1000MP Mark V Field & PSK31/MFSK31/RTTY Via Soundcard
From: "Scott Keating" <n4gva@aerog.com>
Date: Thu, 13 May 2004 19:58:11 -0400
List-post: <mailto:rtty@contesting.com>
FWIW it looked good today in the airplane Thomas.  Looks like I might be on
the air /AM for a few hours tomorrow morning again - pending WX.

73 - Scott, N4GVA (periodic /AM on RTTY/PSK/MFSK)



-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Thomas Giella KN4LF
Sent: Thursday, May 13, 2004 7:27 PM
To: a RTTY Reflector; a TARA PSK eGroup; a PSK31 QTH eList; a psk31 eGroup;
a Digital Radio eGroup; a 070 PSK31 eGroup; a FT-1000MP eGroup; a _FT-1000MP
eGroup
Subject: [RTTY] FT-1000MP Mark V Field & PSK31/MFSK31/RTTY Via Soundcard

I bought a new FT-1000MP Mark V Field last weekend and am just getting
around to interfacing it via my homebrewed digital interface and homebrewed
computer. For DSP software I use Hamscope v1.54 because it supports PSK31,
MFSK16 and RTTY.

Using the supplied five pin packet male plug I soldered transceiver audio
out to soundcard in at pin #4 (data out) and that works fine. I also
soldered the PTT line from the computer to pin #3 and that keys the rig up
fine. The problem is with soundcard audio out to transceiver audio in. I
soldered that to pin #1 (data in) and I get no or low audio in, even with
the soundcard controls turned up to an acceptable level. So I presume that
this is the wrong place for audio in to the 
transceiver. As far as I can see I either send audio in via the mic jack on
the front of the rig which is unacceptable to me because of wear and tear on
the male jack. Or I use RCA female "Patch" jack on the back of the rig,
which is also unacceptable to me because it's tied to the mic jack on front
and I would still have to unhook the MD-100 desk mic to prevent audio pick
up.

Am I missing something? Also as far as menu settings, I went to 8-6 and set
it up by selecting Easy-Set with the sub VFO knob and PS31-SU with the main
VFO knob. Any help would be appreciated.

73 & GUD DX,
Thomas F. Giella, KN4LF
Retired Space & Atmospheric Weather Forecaster
Plant City, FL, USA
Grid Square EL87WX
QSL Via Direct Snail Mail, ARRL LOTW & eQSL

NWS SKYWARN Observer # HIL-249
SWFWMD Rainfall Observer #574
PODX 070 PSK31 Club Member #349

KN4LF Daily Solar Space Weather & Geomagnetic Data Archive
http://www.kn4lf.com/kn4lf5.htm
KN4LF HF/MF Radio Propagation Theory Notes http://www.kn4lf.com/kn4lf8.htm
KN4LF 160-10 Meter Amateur Radio Resources & More http://www.kn4lf.com
Florida Space & Atmospheric Weather Institute http://www.kn4lf.com/fsawi.htm




---
Outgoing mail is certified virus free by Grisoft AVG 6.0.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.684 / Virus Database: 446 - Release Date: 5/13/2004
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>