On 12 Apr 2004 at 7:06, Richard Kriss wrote:
> I am getting tired of having to pull and change the 13-Pin ACCY plug and
> cable to change from using the PK-232 to the SignaLink interface PSK. I
> wonder if someone has a better solution. The Timewave PK-232/PSK mod is not
> a solution because their PC software solution to keying the radio will not
> work with a Mac.
>
> I have looked and cannot find 13-Pin DIN A/B switch that would solve my
> problem. I have an old PC A/B switch that could be modified but I would
> rather just buy new switch. I have looked and cannot fine a female 13-Pin
> DIN that I could use to modify an old PC A/B switch.
>
> I hate soldering to 13-Pin DIN plugs used by Kenwood and Icom
>
> Dick, AA5VU
Why not just solder a DB-25 on the interface end of your 13-pin ACCY cable, and
also to the cables from the PK-232 and SignaLink to match your switch... seems
it
would be easier to mate everything that way than converting to DIN.
73 de KA3HSW
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|