RTTY
[Top] [All Lists]

Re: [RTTY] Filters

To: <fathom@Access4Less.net>, <cfmorris@bellsouth.net>
Subject: Re: [RTTY] Filters
From: "ws7i " <ws7i@ewarg.org>
Reply-to: ws7i@ewarg.org
Date: Tue, 23 Mar 2004 09:14:39 -0800
List-post: <mailto:rtty@contesting.com>
The most important filter in any radio is that in the 455 IF as far as RTTY 
goes.  Stacking is good. I have always liked 250Hz 455 and 500Hz, with a 500Hz 
in the 8Mhz IF. Works swell.

Some radios only allow so many choices.  850 Kenwoods word fine with 250 and 
500Hz as I recall when I owned one and operated even more of them in Texas!

Ron swears by narrow IF filters.

---------- Original Message ----------------------------------
From: "Charles Morrison" <cfmorris@bellsouth.net>
Reply-To: cfmorris@bellsouth.net
Date:  Tue, 23 Mar 2004 10:19:19 -0600


Date:   Tue, 23 Mar 2004 05:39:21 -0000
From:   "David Ashworth" <fathom@Access4Less.net>
To:     <RTTY@contesting.com>
Subject:        [RTTY] Inrad filters for rtty question
        Message-ID: <000f01c41099$3205d420$0401a8c0@herman> Content-Type:
text/plain;
        charset="iso-8859-1"
        MIME-Version: 1.0
        Content-Transfer-Encoding: 7bit
        Precedence: list
        Message: 8

Enjoyed the last contest and have a question for any operators that may be
using a Kenwood TS850.  I seem to have one Kenwood filter in my radio
(YK-88SN1).  There are two more empty slots for filters, one is for the 455
KHz IF and the other for the 8.83 MHz IF.  As the contest got going, I used
the slope tune control to neck down the signals, but perhaps another filter
would also help.  I see that Inrad makes several filters-a 250 for 455 and
8.83 and a 400 for 8.83.  Wonder which filter(s) would be a good choice to
reduce the adjacent stations but not get too narrow?  Thank you for your
help, Dave, NC6P.


Dave,

I've found that in my 850, the biggest improvement was adding the second
500hz filter to the 455 if, and using both 500 hz filters.  In my 850, I've
got the 2 original Kenwood 500hz filters, the 8.83 and the 455, and an Inrad
250 in the 8.83.

As it turns out, not to knock the 250, but going from 2.7k in both if's to
500hz in both if's was a bigger improvement in crowded bands then going from
both 500hz ifs to the 250hz in the 8.83if and the 500hz in the 455if.

As it turns out though, I don't think I've left the 455 if in the 2.7hz
setting and switched in the 250hz 8.83 filter..

I think the 455/500 is more expensive then the 8.83/250 though.. so it may
come to dollars and sense.

Charlie
KI5XP


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty


--
--
ws7i@ewarg.org


--
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>