Paul wins a beer.
I have two soundcards, I was had the wrong one set for the recording function.
Got the Santa Cruz card ticked and I now have a real nice level of audio out
for MMTTY
A much better bandpass than the motherboard NVidia card had.
Thanks to all who made suggestions. I suspected something like this as
adjusting the
volume controls on the sound card had no effect. Was using the wrong sound card
controls....Duh!
----- Original Message -----
From: "Paul Baldock" <paul.baldock@verizon.net>
To: <1000mp@mailman.qth.net>
Sent: Monday, February 16, 2004 1:53 PM
Subject: Re: [1000mp] which do you yse
> At 01:25 PM 2/16/04 -0600, you wrote:
> >Yaesu FT1000MP
> >I wish to use the RX Audio Out pin on the RTTY to feed my sound card.
> >It will work if I connect it to the MIC connector.
> >But will not work if I feed the Line IN connector.
>
> Have you enabled the Line IN (put a tick in the correct box) for the PC's
> record controls?
>
> Paul
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> 1000mp@mailman.qth.net
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|