On Wed, 04 Feb 2004 09:22:41 -0800, JIm wrote:
>I am just getting back on RITTY after being off the air for the last 5
>years. Looks like a lot has changed with most every one running sound
>cards. I am on with a old pk232mbx and I spent $$$$ for pkTerm (lots of
>bugs) . The rig is a ts950s I would like to run FSK. So what's the best
>way to go using a sound card (software, interface, or what every)
_________________________________________________________
Download MMTTY; it's free and does an excellent job. You'll find it's
better in fact than your PK232MBX at decoding the weak ones. You can
either build your own interface cables or buy something like a
RigBlaster. Details are in the help files. Getting the com ports
configured correctly is not easy, but is doable given some patience.
Lots of help available on the reflector.
Windows only, though. No DOS, Mac or Linux.
http://www.qsl.net/mmhamsoft/mmtty/
--
Bill, W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|