The FT990 is exactly the same hook up as a 1000 or 1000 MP and what you say
is correct and exactly how I do it. As noted by WA9ALS, in PACKET mode you
must supply PTT to key the radio. VOX is INOP.
Ty K3MM
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com]On
Behalf Of Boris Knezovic T93Y
Sent: Thursday, November 20, 2003 2:30 PM
To: rtty@contesting.com
Subject: [RTTY] FT-1000MP owners I need help...
Hi all!
I am getting ready for my 25. November to 02. December contest DXpedition
to Martinique (http://www.t93y.com/fm2003) and, as I want to be ready in
advance, I need help from FT-1000MP owners in order to operate RTTY from
there.
I am looking at the FT-990 manual and need someone to confirm that my
soundboard AFSK (standard two transformers and optocoupler unit used with
my TS-690) should be connected to the PACKET jack on the back (1-data in,
2-gnd, 3-ptt, 4-data out, 5-busy). If it is different, please let me know
what type of connector I need and what is the proper pinout.
I do not think this is of much interest for other people on the reflector
so please reply direct. Thanks in advance.
73's Boris T93Y
---
Boris Knezovic T93Y, P.O. Box 59, Sarajevo BA-71000, Bosnia and Herzegovina
E-mail : t93y@lsinter.net or boris@t93y.com
WEB Page : http://www.t93y.com
---
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|