Hi,
Thank you for your comments on this subject. Didn't know if I was doing
something
fundamentally wrong or not.... I have to keep reminding myself to "K I S S".
Thank you all for all the info that has been written on this and appreciate it.
Am using the suggestions for setting up things here..
73 Phil
PS: The web page prints ok except there is no page break for info over the
10-11 inch length
and I loose the part after that. I did use the select all and then
modified it for text only
and went to multiple pages. Too bad the images didn't show....
>Eric has an excellent memory!
>
>Phil et al,
>
>Most rttycontesting.com pages do not print properly at this time. Yes, I am
>working on a solution but it's a solution that will take some time. The only
>pages that should print properly are the records pages. All of them were done
>in MS Excel and should print fine.
>
>Most of the pages such as the RTTY Starter were done using Geocities'
>PageBuilder. Plans are to convert all PageBuilder pages to one form of
>Microsoft Office
>program or another, either Word, Excel or other. This makes it much easier to
>manage, makes for nice looking pages and enables the pages to be printed
>normally.
>
>I'm working on converting the RTTY Starter pages first and we'll see what that
>looks like then go from there. I'll announce when it's finished.
>
>73, Don
>
>
>
>----- Original Message -----
>From: "Eric - VE3GSI" <ve3gsi@sympatico.ca>
>To: <rtty@contesting.com>
>Sent: Monday, June 09, 2003 3:14 PM
>Subject: RE: [RTTY] Printing from rttycontesting.com website?
>
>
> > Hi Phil,
> > Don admitted he had a print formatting problem on a previous posting (or
> > other reflector). I believe he said he would fix the problem when he had a
> > chance and suggested using a landscape print option for printing in the
> > meantime.
> >
> > I have a quick work around by just doing a select text from the web page,
> > copy and paste into a word processor and printing from there. Worked well
> > enough for the topic I needed that day.
> >
> > Looking forward to working you,
> > Eric - VE3GSI
> > ve3gsi@arrl.net
> >
>Philip Florig e-mail:pflorig@ieee.org
115 Horne Rd. (or):W9IXX@arrl.net
Columbus, NC. 28722 amateur radio:W9IXX
USA also:J3X-T30,31,32,33P
team member:AH1A-J3A
-----------------------------------------------
IPR Systems, Inc. tel: 1-708-385-7500
11651 Mayfield Ave. fax: 1-708-385-7515
Alsip, IL. 60803 email:info@iprsys.com
USA
INDUSTRIAL POWER SUPPLIES & RECTIFIERS
-----------------------------------------------
|