Gert and all, The Hal ST-5000 is a solid state version of the famouse ST-5/AS
(autostart). It is a low cost entry level terminal unit for rtty that has a
internal 60ma loop to run a tty machine.
To use it for computer operation, you use the FSK output to key the RS-232
input of the computer. This give you receive. To transmit, you can either
break the AFSK line inside the ST-5000 and key the afsk with the RS-232 output
of the computer or just key you FSK of the rig with the RS-232 output of the
computer. Nice terminal unit. But soundcard rtty or the later Hal terminal
units are soooooo much better.
Joe K0Bx
-------Original Message-------
From: "Gert E. Janssens" <gert33@rionet.org>
Sent: 02/03/03 08:16 PM
To: RTTY Reflector <rtty@contesting.com>
Subject: [RTTY] HAL ST-5000
>
>
Hi guys,
Someone gave me a HAL ST-5000 unit this morning.
He never used it himself (it was from a SK friend of his) but said that it
was working the last time they spoke. But that's all the information he
could give me...
Does anyone know where I can find more (good) info for this model? What it
does/can do, etc.
I tried a search on Google but didn't really find much useful info.
Thanks, 73,
Gert - K5WW
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
>
http://www.qsl.net/k0bx
k0bx@qsl.net
|