I don't have a Kenwood, but everything sounds OK. Give a time and maybe
some of us can listen for you.
----- Original Message -----
From: "Cal Kutemeier" <ckuter@ix.netcom.com>
To: <rtty@contesting.com>
Sent: Sunday, December 22, 2002 9:40 PM
Subject: [RTTY] MMTTY - FSK - Knwd 570
>
> I am trying to get MMTTY v 1.61 working on FSK rather than AFSK. I built
> the interface as shown on AA5AU's website. I tried to have a QSO with
> someone nearby and he said the noise level dropped (he is using MMTTY on
> AFSK), but no copy on the screen. I listened to my TX with a shortwave
> radio and seem to hear normal RTTY sounds.
>
> The interface for FSK goes from DB9 pin 3 to ACC2 (13 pin) plug pin 2 on
the
> radio. PTT from DB9 pin 7 to Pin 9 on ACC2.
>
> Ground from DB9 pin 5 to ACC2 pin 8.
>
> I changed MMtty to Com-TXd for FSK. No other changes to MMTTY. I am not
> running rig control either.
>
> On the 570, I tried Polarity (Menu # 30) both OFF and ON and no change.
>
> AFSK still works fine when I changed everything back. I am using the same
> COMM PORT for AFSK and FSK.
>
> Is there something else I need to set on MMTTY or the 570 menu?
>
>
> Tnx
> Cal
> N9KO
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
|