----- Original Message -----=20
From: Jim Martin=20
To: VCombs7707@aol.com=20
Sent: Wednesday, October 30, 2002 4:46 PM
Subject: Re: [RTTY] WF1B
Thanks Vern and Tom
GPF it is but I still cannot clear it. Even removing and reinstalling =
com ports. I am using standard com 1 and 2 and have disabled all other =
com ports until I sort it out.
Thanks for the info on the turbo pascal handbook Jay, unfortunatly not =
something I have in the house. Most programs have a list of common =
errors and their solutions, that is what I was looking for.
73
Jim MM0BQI
----- Original Message -----=20
From: VCombs7707@aol.com=20
To: MM0BQI@theRSGB.net=20
Sent: Wednesday, October 30, 2002 3:45 PM
Subject: Re: [RTTY] WF1B
JIm,=20
I used to get that error code when using WF1B. My system is Win 98, =
using serial port 1, PK232 tnc and Pen 2 300 hz computer.=20
Before opening the program, go into the control panel and disable the =
comport that you are using. Then after it is finished go back and enable =
the comport, and make sure the box is checked exists in all hardware =
profiles. Then start the WF1B program and it should work. I was also =
running the program in windows.=20
Hope this helps.=20
Vern=20
KJ7TH=20
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|