At 06:58 PM 8/7/2002, Bill Coleman wrote:
>The solution is simply to increase the symbol length. For single-bit
>modes like Baudot RTTY, this would also decrease the information rate.
>But, better to get the information across slowly than not at all.
I am thinking out loud here, but I do have some small experience with data
recovery in a difficult channel...
There are many ways to solve the problem (other than increasing the symbol
rate), even within the existing protocol. In general, the trick is to
correctly characterize the error function of the channel and to compensate
for this during transmit and/or receive.
Seems to me that if we set up the challenge of 160m for the folks who write
the RTTY software, we may very well end up with an improved product on the
other bands.
73 - jeff wk6i
Jeff Stai Twisted Oak Winery LLC
Email jds@twistedoak.com
Amateur Radio WK6I
ROC Web Page http://www.rocstock.org/
|