RTTY
[Top] [All Lists]

[RTTY] 50 Baud

To: <rtty@contesting.com>
Subject: [RTTY] 50 Baud
From: w2up@mindspring.com (Barry )
Date: Thu, 6 Jun 2002 10:53:20 -0400
Does anyone really know why ARRL approved SSB only, and if 
attempts are being made to cover the other modes?
Barry

On 6 Jun 02, at 14:22, ON4AOI wrote:

> MAYBE just MAYBE,
> ED is doing this (50 baud and also 75 baud) to make sure it is him and
> not some pirat, and maybe ARRL will consider to make this contacts
> acceptable also.
> 
> 73 Guy ON4AOI
> 
> BAND DECODER and related stuff at
> http://users.skynet.be/ON4AOI/banddecoder.shtml
> 
> DX4WIN soft and related stuff at
> http://users.skynet.be/ON4AOI/dx4win.shtml
> 
> DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
> http://users.skynet.be/ON4AOI/keyer.shtml
> 
> ARSWIN link and related stuff at
> http://users.skynet.be/ON4AOI/web7.htm
> 
> DXTELNET soft and related stuff at
> http://users.skynet.be/ON4AOI/dxt.shtml
> 
> MY SALESPAGE with radioamateur & computer parts
> http://users.skynet.be/ON4AOI/sale.shtml
> ----- Original Message -----
> From: "Don Hill AA5AU" <aa5au@bellsouth.net>
> To: "Bill Hawkins" <w5ec@bellsouth.net>; <RTTY@contesting.com>
> Sent: Thursday, June 06, 2002 2:04 PM
> Subject: Re: [RTTY] 50 Baud
> 
> 
> > I'm guessing that he is using 50 baud by mistake.  Not sure what s/w
> > he is using, maybe Mix32? or something like that.  I have seen on a
> > couple of occasions where it was spotted that he went from 45 to 50
> > baud.  Perhaps he is accidentally putting the program in 50 baud and
> > not knowing about
> it.
> >
> > I don't think 50 baud should be a problem on HF.  The problem is
> > realizing the difference in speed from 45 to 50.  You will get some
> > print from a 50 baud signal even if you are set to receive 45.  If
> > are still in the hunt
> for Ed,
> > just remember to change speeds when you come across a station that
> > is not printing but you feel it should be.
> >
> > By the way, Ed's back on 21081 right now at 50 baud.  No copy here
> remotely
> > as the antenna is pointed at YA.
> >
> > 73, Don AA5AU
> >
> > ----- Original Message -----
> > From: "Bill Hawkins" <w5ec@bellsouth.net>
> > To: <RTTY@contesting.com>
> > Sent: Thursday, June 06, 2002 6:28 AM
> > Subject: [RTTY] 50 Baud
> >
> >
> > > I see on some postings some comments about P5/4L4FN using 50 baud
> > > RTTY. Is this bad? Some comments say it is to high. Bill
> > >
> > > _______________________________________________
> > > RTTY mailing list
> > > RTTY@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/rtty
> > >
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> >
> 
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty


--
Barry Kutner, W2UP              Internet: w2up@mindspring.com
Newtown, PA                     Frankford Radio Club
        

<Prev in Thread] Current Thread [Next in Thread>