MRBILL1953@aol.com writes:
<<. . . . I'm using a Yaesu FT-1000MP along with a AEA PK-900. Since I
installed this radio I wanted to hook it up using FSK. . . . . when I
transmit I get nothing but a steady tone on the output, no shifting RTTY
tones. . . .
>>
Bill,
I do not have an AEA PK-900. However, on the FT-1000MP, the RTTY 4 pin DIN is
as follows:
1 - FSK OUT
2 - AF IN
3 - PTT
5 - GND
Since my soldering is so sloppy, I only soldered pin 1. I use the phono PTT
to activate transmit and audio from AF OUTPUT stereo jack. My setup is being
driven by a DSP599zx.
Gud luck
ue Rick W4UEF
|