Thankyou for that hint Eddie.. will give it a go. Thankyou also for all
the times we have worked in various contests.. Your points are always
appreciated.
John - vk4cej / vk4wpx
> John, here is a quick and dirty method for type ahead.
>
> Set up a new button with the label of your choice, I use 'T-ahead'. Right
click
> on the button and add the command CONTROL_CK followed by ONE carriage
return,
> click OK.
> Then, set up another button, 'TX buffer'. Right click it and add the
command
> CONTROL_CX followed by one cr, click OK.
>
> While the other stn is sending, just click the T-ahead button and type
away.
> When it is your turn to TX, hit the TX buffer and all the text will be
sent
> automagically. Whilst the typed ahead text is being sent, you can continue
to
> type away. When you are done, CTRL D shuts off your TX.
>
> Good luck, Eddie W6/G0AZT
> Use CTRL D
>
>
|