A useful data point. Given the labor involved in installing the ferrites
after the panels were installed, I decided it was cheap insurance to
just put them on first.
73,
Scott K9MA
On 8/1/2024 4:18 PM, k1ttt.dave@gmail.com wrote:
On my enphase system the single turn ferrites we definitely needed at least
on 10m.
David Robbins K1TTT
e-mail:mailto:k1ttt@arrl.net
web:http://wiki.k1ttt.net
AR-Cluster node:telnet://k1ttt.net:7373
-----Original Message-----
From: RFI<rfi-bounces+k1ttt=arrl.net@contesting.com> On Behalf Of K9MA
Sent: Thursday, August 1, 2024 17:07
To:rfi@contesting.com
Subject: Re: [RFI] New RFI Source
Both my immediate neighbor and I have Enphase systems. I had single-turn
ferrite cores put on all the leads of both, and I've detected absolutely no
RFI from them. Whether the ferrites were necessary is unknown, but the
single turn may not have had much effect at HF.
73,
Scott K9MA
--
Scott K9MA
k9ma@sdellington.us
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|