On 6/26/2022 1:11 PM, Dan K2YWE wrote:
Any suggested snap-on cores or other ideas?
k9yc.com/publish.htm
Snap-on cores are optimized for VHF. To make them effective at HF, we
must wind multiple turns through the RIGHT cores. Fair-Rite #31 is the
ONLY good solution.
Study the app notes on RFI on my webpage. The appendix to
k9yc.com/RFI-Ham.pdf
includes part numbers and sources. The winding guidance in the app note
about Killing Receive Noise applies directly to interference TO home
entertainment systems.
Also, pay attention to the material in the link about "Pin One Problem,"
which is a major cause of RFI. EVERY cable connected to equipment is a
receive antenna for our signals that excite Pin One Problems. CATV and
speaker cables are some of the "best" antennas.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|