Makes life SOOOOOOOOOOOOO much easier and better.
I LOATHE RFI..... Astron makes (now, not then) a VLS model now that
fits the bill perfectly!
______________________
Clay Autery, KY5G
(318) 518-1389
On 01/21/21 09:32, John K9UWA wrote:
Two years ago I did exactly the same as Clay. I purchased two new monitors that
had External 19 volt wall wart supplies.
No problem I can make those go away. A month or so later at a hamfest I bought
a 0 to 20 volt regulated Lambda 10A supply.
The worst thing was carrying it from the sellers booth to the car. It must
weigh a good 20 pounds. Problem solved. Clean DC
power and zero RFI noise.
73
John k9uwa
On 20 Jan 2021 at 22:31, Clay Autery wrote:
Well, this is a 19VDC monitor using a power adapter, which is AWESOME!!!
If it has an RFI issue that you can't solve, you can simply find a DC-DC
converter (that is RF silent where you need it) and put it inline
between your power supply (assuming a good sized Astron or other with
PLENTY of spare capacity) and Bob's your uncle...
Another solution would be a dedicated 19VDC linear power supply.... OR
a 24VDC Astron with a linear voltage regulator inline to drop to 19 VDC.
ANY way you slice it, you can likely make this one quiet.
Don't bother buying ANY monitor/display with an INTERNAL power
supply.... (IMHO).
73, ______________________
Clay Autery, KY5G
John Goller, K9UWA & Jean Goller, N9PXF
Antique Radio Restorations
k9uwa@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
USA
1-260-637-6426
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|