I've never had a problem with this wireless keyboard/mouse:
https://www.walmart.com/ip/Logitech-MK270-Wireless-Keyboard-Mouse-Combo/28540111
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
From: Joe
Sent: Saturday, March 3, 2018 8:24 AM
To: rfi@contesting.com
Subject: [RFI] Keyboard
Is RF getting into a keyboard issue OK here, it is RFI in a way..
OK, Say you get RF into a USB keyboard. It just stops working and
the
only way to get it working again is a total re-boot.
I'm assuming the best option is ferrite beads on the cable.
Now question, where is the best placement of the beads. Keyboard
end?
Computer end? BOTH?
I have two here, a small one where I could get one or two passes
through
the hole. ( it is a Radio Shack split thing )
and then a much larger one, also split,, but the hole is close to
a inch
ID. so I could do many turns.
What would be best to put where?
Joe WB9SBD
--
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|