RFI
[Top] [All Lists]

Re: [RFI] Noise location tools

To: rfi@contesting.com
Subject: Re: [RFI] Noise location tools
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Tue, 16 Jan 2018 20:53:58 -0800
List-post: <mailto:rfi@contesting.com>
On 1/16/2018 8:36 PM, W0MU Mike Fatchett wrote:
Other than the ultra sonic dish I have most of the other pieces parts.

Mike,

Understand that the dish helps zero in on the specific piece of the system that's arcing. But that's the power company's job, and by identifying the pole or the immediate area where the problem is, they'll find it. And doing their work for them is unlikely to get it fixed any faster. Indeed, power companies are fairly willing to come out and troubleshoot a problem if they think it might be dangerous or indicate equipment failure that could lead to a system event. But getting it fixed can be a very different matter, because the working groups and managers responsible for do that are often rewarded for using less of their annual budgets, so if it isn't judged likely to cause any problem other than in your radio, it's very unlikely that it will be fixed.

73, Jim K9YC

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>